3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
An Ender 3 v2 with the plate on backwards.
Just be aware that the plastic shroud tends to disintegrate over time. The MrIscoc firmware for that machine is a huge step up from what comes with it; if that's your kinda thing. If modding machines isn't though, don't ever touch the firmware.
Wait... The black layer is meant to go on the under side? That makes no sense when there is print on it
I said backwards, not upside down. You have the logo facing the back of the machine. It's supposed to be readable from the front.
Ah got it. Just thought you meant that the plastic peels off if i used it that way round lol
I do rotate the bed occasionally. I feel like it wears evenly but i guess i could just rotate the print instead.
Well well ... I don't really care too much about apearances anyway.
It actually IS possible to print on the plain glass on the other side. Many early machines only had glass as a build plate, so that's valid - especially with various other materials.
The black surface does wear out over time, when you need to replace it, a magnetic sheet + PEI build surface is probably what you want to move to. The biggest problem with the black glass plates is that the surface acts like sandpaper; and it can easily destroy a nozzle with just a short swipe across it.