this post was submitted on 19 Jul 2025
429 points (99.5% liked)

hmmm

6345 readers
569 users here now

For things that are "hmmm".

Rule 1: All post titles except for meta posts should be just plain "hmmm" and nothing else, no emotes, no capitalisation, no extending it to "hmmmm" etc.

founded 2 years ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] morgunkorn@discuss.tchncs.de 32 points 19 hours ago (1 children)

TÜV sagt nein.

DIN 18040

Ramps, external ramp, internal ramp, handrail

Access areas at entrances with a gradient of 3% or more must be designed as ramps. With a length of up to 10 m, a longitudinal gradient of up to 4% is permitted. Ramps must be safe to walk and drive on. Drainage must be ensured in the outdoor area.

Ramps in public areas must always be designed in accordance with DIN 18040-1 with a maximum gradient of 6% and without a transverse gradient!

  • Longitudinal gradient: max.6%
  • Transverse gradient: 0
  • Clear width: min.1.20m
  • Length of ramp run: max.6.00m
  • Length of intermediate landing: min.1.50m
  • Height of wheel deflector: min.0.10m
  • Height of handrail on both sides: 0.85 to 0.95m with flush finish
  • Handrail diameter: 0.035 to 0.04m
[–] NikkiDimes@lemmy.world 17 points 17 hours ago* (last edited 17 hours ago) (1 children)

6% gradient, 100% gradient, what's the difference really

[–] myotheraccount@lemmy.world 3 points 5 hours ago

Everything is relative anyway. Just choose a different plane of reference and you're good to go!